Long coding is used to set various options in the control module. To access this function follow the instructions:

  • Press the button to open control units list.
  • Select the needed control unit by tapping on it.
  • Press "Long coding" button.
The use of Long Coding:
  • Press and hold button to open the long coding value.
  • display the current long coding value of selected control unit. Some control units require a valid login code before you can re-code them. You can find more information about the login codes HERE
  • Press button to change the long coding format from HEX to ASCII or vice versa.
  • Press button to open the byte selection.
  • Enter the byte number and press "OK".
  • Press button to open the HEX value of selected byte.
  • display the current value of selected byte.
  • Press button to change the format of value from HEX to DEC or vice versa.
  • Mark/Unmark the bits of byte.
  • Press buttons to scroll via the bytes (The right arrow to the right side and left arrow to the left side).
  • Press and hold button to accept and save all changes which were done.
Development of descriptions:

  • hold on the bit value.
  • Press button to select the language of displayed values descriptions.
  • the list of languages are displayed of which the descriptions were created.
  • Press button to add the descriptions.
  • Press button to select in which language the description will be created.
  • select the language.
  • enter the names.
  • Press button to save the description.
  • Rate the descriptions by pressing buttons.